Steep Slopes and Deep Ends: Robot Traction Reality
A robot that handles wall climbing all season can still slide down the deep end slope on a random Tuesday. Traction physics, drive type, and a checklist for fixing the…
inground pools
Pool Robot Gets Stuck in the Same Spot Every Run
When a robot beaches on the same drain or ladder every cycle, geometry is the culprit. Identify the trap, apply the right workaround, and let the machine finally finish its…
Robotic vs Pressure Pool Cleaners: Which Fits Your Setup
Whether a pressure cleaner or a robot belongs in your pool comes down to plumbing, trees, and your power bill. Walk through five common setups and leave with a verdict…
Pool Robot Compatibility: Surface, Shape, and Size
The same robot can star in one pool and flounder in the next. Surface, shape, depth, and water decide the match, and this guide walks all four with a worked…
Vinyl Liner Pools: Choosing a Robot That Won’t Scratch
Robots almost never scratch vinyl; worn rollers dragging grit do. A liner-first look at brush materials, wear signs, snag points, and the paperwork that protects you.
Fiberglass Pools and Robots: Grip, Slip, and Brushes
Gelcoat gives a robot almost nothing to bite, yet the right machine climbs it all day. The difference is rubber contact parts, healthy flow, and knowing the three slip zones.
Tile Pools and Tile Lines: Robot Cleaning Without Damage
Glazed tile is tougher than it looks, and grout is weaker. What actually scratches tile pools, which brushes to run, and how a robot keeps the waterline from becoming a…
Freeform Pools: Getting Full Coverage in Curves
Will a robot actually reach every curve of a kidney or lagoon pool, or does it just bounce around the middle and call the cycle finished? The honest answer depends…
Steps, Benches, and Ledges: The Zones Robots Miss
Robot cleaners promise full coverage, but steps, benches, and tanning ledges sit in a geometry and depth gap no climbing algorithm solves. Here is why, and the five minute habit…